|
  
Model：KDT-0150US-SA3B
Designed, developed and built to provide the most cost-effective touch solutions for system integrators and VARs. It packs Keetouch's quality and reliability into an integrated, affordable touchmonitor
◆ Main Features
◆ “Designed for touch” features such as a stable tilt base
◆ Dual RS232 and USB touch interface
◆ Optional USB Hub with 4 ports output
◆ Keetouch’s SAW technology on pure glass for the ultimate in image quality
◆ High quality panel with high brightness,high contrast ratio and broad viewing angle
◆ Mounting holes on the base bottom for tabletop security
◆ Finger or gloved hand operation
◆ FCC,CE,CCC,RoHS
◆ Applications
◆ Point-of-sale (POS)
◆ Point of service
◆ Loyalty systems
◆ Countertop kiosk information systems (KIS)
◆ Internet access points
◆ Interactive advertising and display
◆ Guest check in and check out ◆ Specification
|
Model No. |
KDT-0150US-SA3B |
|
Series |
DT |
|
Case/bezel color |
Dark gray |
|
LCD Type |
Active matrix TFT-LCD |
|
Display Size |
15＂（diagonal） |
|
Active Area |
12.0＂(304mm)×9.0＂(228mm) |
|
Monitor dimensions |
Width: 13.6"(345 mm)
Height(including base):10.4"(265 mm)
Depth (including base): 8.3"(210 mm) |
|
Suggested Resolution |
1024×768 |
|
Support Colors |
16.2M |
|
Brightness(Typ.) |
Pure LCD Panel |
250cd/m2 |
|
With SAW Glass Sensor |
225cd/m2 |
|
Response Time(Typ.) |
5ms |
|
Viewing Angle
(Typ.at CR＞10)） |
Horizontal(left/right) |
75°/75° |
|
Vertical(up/down) |
70°/60° |
|
Contrast Ratio(Typ.) |
500:1 |
|
Video Input |
Analog RGB |
|
Signal Input |
H/V Separate Sync. (TTL) |
|
Video Signal Input Connector |
Mini D-Sub 15-pin VGA |
|
Frequency（H/V） |
30～80KHz / 60～75Hz |
|
Power Supply |
Type:Adaptor in base,Input (line) voltage: 100-240 VAC, 50-60 Hz |
|
Environment |
Operating Temp. |
0～50°C |
|
Storage Temp. |
-20～60°C |
|
Operating RH: |
20%～80% |
|
Storage RH: |
10%～90% |
|
LCD Back light Life(Typ.) |
50,000 Hours |
|
Weight（N.W/G.W） |
Approximately 4Kg /5Kg |
|
Power Consumption |
30W Max. |
|
Mount options |
Threaded-through mounting holes under base |
|
OSD Control |
Brightness, Contrast Ratio, Auto-adjust, Phase, Clock, H/V Location, Languages, Function, Reset |
|
Touch screen Type |
Keetouch 15” SAW 3MM thickness of touch screen
(Available Options: Anti-glare/Tempered) |
|
Touch Response time |
9ms |
|
Touch System Interface |
Dual RS232 and USB |
|
Agency approvals |
FCC,CE,CCC,RoHS |
|
Regular Warranty |
5 years for SAW Sensor; 3 years for controller; 1 year for LCD |
|
Other features |
Optional USB Hub with 4 ports output |
|
NOTE:The display SPEC. will change follow the relevant LCD panel brand and model |
|
